71012192 Foot Step Power

  PROJECT REPORT B TECH PROJECT INITIAL REPORT Submitted in partial fulfillment for the award of the degree of Bachelor of Technology in Electrical & Electronics Engineering   By JITHIN BABUSREENATH.N.R SUJITH GEORGEVIJAI JAIRAJVIMALNATH.V   EEE 7 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING SREE BUDDHA COLLEGE OF ENGINEERING PATTOOR  (Affiliated to university of Kerala, managed by the Sree Buddha educational society,Kollam-21)Pattoor P.O., Alleppy dist.,   Kerala-690529,India2011  FOOT STEP POWER GENERATION Company selected for project work  :-PANTECHPlace:-ERNAKULAM GROUP MEMBERSJithin BabuSreenath.N.R Sujith GeorgeVijai JairajVimalnath.V  FOOT STEP POWER GENERATION  ABSTRACT In this project we are generating electrical power as non-conventionalmethod by simply walking or running on the foot step. Non-conventionalenergy system is very essential at this time to our nation. Non-conventional energy using foot step is converting mechanicalenergy into the electrical energy. This project using simple drive mechanism such as rack and pinionassemble and chain drive mechanism. For this project the conversion of theforce energy in to electrical energy. The control mechanism carries the rack & pinion, D.C generator, battery and inverter control. We have discussed thevarious applications and further extension also. The D.C generator used in this project is Permanente Magnet D.C generator. The Generator is coupled to the flywheel Shaft with the help of Spur Gear Mechanism. The Output of thegenerator is 12 Volts. This 12 Volt is stored in a 7 Amp-Hour Battery.The battery type is Lead-Acid battery. The battery is connected to theinverter which is used to convert the D.C 12 Volt to the 230 Volt A.C. Byincreasing the capacity of battery and inverter circuit, the power rating is increased.